Author

admin

Browsing

As governments scramble to secure supplies of rare earth elements, a new engineering study from Malaysia has cast fresh light on why China continues to dominate one of the most critical parts of the supply chain—processing.

The research zeroes in on what many industry insiders already regard as the hardest step in rare earth production: separating neodymium and praseodymium to the ultra-high purity levels required for permanent magnets.

Rare earth elements tend to occur in clusters and behave almost identically at the chemical level. Neodymium and praseodymium, two of the most important inputs for high-performance magnets, sit next to each other on the periodic table.

This proximity makes them extremely difficult to separate cleanly. Even with viable ore, the separation step is so complex and capital-intensive that it continues to favor countries like China that already operate such systems at scale.

What makes this phase more complex, according to the research, is that separating neodymium from praseodymium to magnet-grade purity requires an extraordinary number of repetitions.

Their modeled plant design calls for roughly 62 equilibrium stages, compared with as few as 16 stages for earlier, bulk separations. In practical terms, this means that a facility capable of producing magnet-grade material must be vast, expensive, and technically sophisticated.

Loosening the grip

China’s dominance stems largely from its ability to meet this requirement at industrial scale. While the country accounts for about 60 percent of global rare earth mining, it processes close to 90 percent of the world’s supply.

That dominance did not happen by accident. After acquiring early separation know-how from France in the 1980s, China spent decades refining solvent extraction techniques, training engineers, and scaling plants far beyond what most countries were willing or permitted to build.

Today, China produces roughly 70,000 metric tons of refined rare earths per year. It also controls nearly all processing of heavy rare earth elements, which are even more difficult to separate and are critical for high-temperature and defense applications.

Thus, the Malaysian study reinforces why that advantage persists. It shows that even when geology is favorable, processing remains the true barrier to entry.

This reality has sharpened concerns in the US and its allies, especially as China has shown a willingness to use rare earths as a geopolitical tool.

In 2010, Beijing restricted exports to Japan during a diplomatic dispute. In 2023, it imposed global restrictions on the export of rare earth processing and separation technologies, making it harder for competitors to build midstream capacity.

Those moves have heightened urgency in Washington. Rare earths are essential to modern defense systems, from fighter jets and submarines to precision-guided munitions, as well as to electric vehicles and consumer electronics.

Despite being the world’s second-largest rare earth producer, most material mined domestically has historically been sent to China for separation. Until recently, the country lacked commercial-scale facilities capable of turning ore into finished magnet materials.

This is the reality that the rest of the world is trying to slowly change. Since 2020, the US Department of Defense has committed hundreds of millions of dollars to rebuilding a “mine-to-magnet” supply chain, with projects concentrated largely in Texas.

These include light and heavy rare earth separation plants, metal and alloy production, and permanent magnet manufacturing.

Even so, near-term capacity remains small relative to China’s. New facilities will take years to ramp up, and most focus initially on light rare earths rather than the heavier elements where China’s dominance is nearly absolute.

From Project Vault to Africa: US accelerates rare earth supply chain strategy

The United States is stepping up efforts to diversify rare earth supply beyond China, backing early-stage projects aimed at strengthening non-Chinese production and processing capacity.

One such move came in February, when the US Trade and Development Agency (USTDA) confirmed its intention to support Altona Rare Earths’ (LSE:REE) Monte Muambe rare earths project in Mozambique.

The announcement was made by USTDA Deputy Director and Chief Operating Officer Thomas Hardy during a high-level forum on US support for critical mining projects in sub-Saharan Africa, attended by Altona executives.

USTDA’s support is expected to help define the technical and financial development pathway for Monte Muambe, which hosts rare earth elements used in permanent magnets, defence systems and energy transition technologies. The backing remains subject to the execution of a formal grant agreement.

The commitment aligns with broader US initiatives aimed at reshaping critical mineral supply chains, including recent announcements tied to Project Vault — Washington’s effort to secure strategic reserves and reduce reliance on Chinese-dominated processing and refining. It also coincides with the launch of the Forum on Resource Geostrategic Engagement (FORGE), unveiled at the 2026 Critical Minerals Ministerial as a platform to mobilise capital and diplomatic support for resilient mineral supply networks.

While Monte Muambe remains at an early stage, Altona is also awaiting assay results from recent fluorspar and gallium drilling, which the company believes could further enhance the project’s strategic appeal. Fluorspar is a key industrial mineral used in steelmaking, chemicals and battery supply chains, areas where China also holds significant market share.

Taken together, the US backing of Monte Muambe underscores how governments are increasingly using policy tools, financing support and strategic partnerships to counterbalance China’s continued dominance in rare earth processing, a reality highlighted in the recent Malaysian report.

Securities Disclosure: I, Giann Liguid, hold no direct investment interest in any company mentioned in this article.

This post appeared first on investingnews.com

Locksley Resources Limited (ASX: LKY; OTCQX: LKYRFADR: LKYLY) announced a major new target zone revealed by underground mapping at its Desert Antimony Mine (DAM), part of the company’s Mojave Project.

This notable finding, the Beefeater Shear, is a shear zone corridor mapped at widths of up to 10-15 meters and a result of a comprehensive Stage III technical review focusing on the Northern Block. This included high-resolution underground mapping at the DAM and regional structural analysis. More information can be found here: https://cdn-api.markitdigital.com/apiman-gateway/ASX/asx-research/1.0/file/2924-03054294-6A1311088&v=undefined.

‘Locksley’s geology team considers Beefeater to share the same structural timing and kinematic history as the DAM mineralized vein system to the West,’ said Kerrie Matthews, Managing Director and CEO of Locksley. She added that these insights along with the validation of project-wide radiometric targets, pave the way for targeted sampling and drilling to confirm mineralization and economic potential. ‘This allows us to focus on extensions with greater certainty,’ she said, noting that by mapping the underground workings at DAM the company has essentially ‘unlocked’ the geometry of the system.

‘We now see exactly how high-grade, mineralized blocks have been created by later structural events,’ she affirmed adding the identification of the 10-15 meter Beefeater Shear provides Locksley with a new exploration target that can increase the exploration pipeline of critical mineral projects on the Mojave claims. ‘We look forward to receiving assays from the various surface and underground sampling,’ she said.

Locksley Resources (https://www.locksleyresourcescom.au) is focused on critical minerals in the U.S. The company is actively advancing the Mojave Project in California, targeting rare earth elements (REEs) and antimony. Locksley is executing a mine-to-market strategy for antimony, aimed at reestablishing domestic supply chains for critical materials, underpinned by strategic downstream technology partnerships with leading U.S. research institutions and industry partners. This targeted approach, combined with resource development with innovative processing and separation technologies, positions Locksley to play a role in advancing U.S. critical materials independence.

Contact: Beverly Jedynak, beverly.jedynak@viriathus.com, 312-943-1123; 773-350-5793

 

Cision View original content:https://www.prnewswire.com/news-releases/locksley-resources-underground-mapping-reveals-major-new-target-boosting-high-grade-antimony-potential-at-its-mojave-project-desert-antimony-mine-302683981.html

SOURCE Locksley Resources

News Provided by PR Newswire via QuoteMedia

This post appeared first on investingnews.com

Emboldened congressional Democrats are once again expanding their battleground map for this year’s midterm elections, when Republicans will be defending their razor-thin majority in the House.

The Democratic Congressional Campaign Committee (DCCC) on Tuesday added five more offensive opportunities in Colorado, Minnesota, Montana, South Carolina and Virginia to their list of what they consider are vulnerable Republican-held House districts.

That brings the total number of districts Democrats are hoping to flip to 44. The DCCC notes that all five of the new districts they’re adding to their list of ‘offensive targets’ were carried by President Donald Trump by 13 points or fewer in the 2024 elections.

Republicans currently control the House by a 218-214 majority, with two right-tilting districts and one left-leaning seat currently vacant. Democrats need a net gain of just three seats in the midterms to win back the majority for the first time in four years.

The move by the DCCC comes as Democrats are energized, despite the party’s polling woes. Democrats, thanks to their laser focus on affordability amid persistent inflation, scored decisive victories in the 2025 elections and have won or over performed in a slew of scheduled and special ballot box contests since Trump returned to the White House over a year ago.

Republicans, meanwhile, are facing traditional political headwinds in which the party in power in the nation’s capital normally suffers setbacks in the midterm elections. And the GOP is also dealing with Trump’s continued underwater approval ratings and national polls — including the latest Fox News survey — that indicate many Americans feel things are worse off than they were a year ago and remain pessimistic about the economy.

‘Democrats are on offense, and our map reflects the fact that everyday Americans are tired of Republicans’ broken promises and ready for change in Congress,’ DCCC Chair Suzan DelBene emphasized in a statement. ‘Healthcare, housing, groceries, energy bills — they are all going up, and it’s directly because of Republican policies that favor the wealthiest few while leaving hardworking families behind.’

And DelBene predicted, ‘Going into the midterms, Democrats have the winning message, top-tier candidates, and the public on our side, paving the way for a new Democratic House Majority under the leadership of a Speaker Hakeem Jeffries.’

But the rival National Republican Congressional Committee (NRCC) scoffed at the move by the DCCC.

‘National Democrats are daydreaming while the ground collapses beneath them. Democrats are getting demolished in the money race, their incumbents are hanging by a thread, and their disastrous primaries are producing unelectable far-left socialists. The battleground favors Republicans,’ NRCC Spokesman Mike Marinella argued in a statement to Fox News Digital.

House GOP campaign chair says President Trump on midterms campaign trail will be ‘big benefit’ to Republicans

The NRCC is currently targeting what it considers 29 vulnerable House Democrats in the midterms.

The new districts being targeted by the Democrats are Colorado’s 5th Congressional District, where Republican Rep. Jeff Crank won re-election in 2024 by 14 points. They also include Minnesota’s 1st CD and Montana’s 1st CD, where GOP Reps. Brad Finstad and Ryan Zinke are seeking re-election, and Virginia’s 5th CD, where Republican Rep. John McGuire is running for another term.

The fifth district the DCCC is adding to their target list is the open seat race in South Carolina’s 1st CD, where Republican Rep. Nancy Mace is running for governor rather than seeking re-election.


This post appeared first on FOX NEWS

Israeli Prime Minister Benjamin Netanyahu said that he plans to discuss Iran and Gaza with U.S. President Donald Trump during their upcoming visit.

The foreign figure, who is traveling to the U.S. to meet with Trump, indicated that the two nations share a close bond, and that he and Trump are close as well.

‘I am now leaving for the United States for my seventh trip to meet with President Trump since he was elected for a second term. This, of course, does not include his unforgettable visit to Israel and his speech in the Knesset,’ Netanyahu noted, according to the Israeli government.

‘I think these reflect the unique closeness of the extraordinary relationship that we have with the United States, that I personally have with the President, that the State of Israel has with the United States — unprecedented in our history,’ he said.

‘On this trip we will discuss a range of issues: Gaza, the region, but of course, first and foremost, the negotiations with Iran. I will present to the President our outlook regarding the principles of these negotiations — the essential principles which, in my opinion, are important not only to Israel, but to everyone around the world who wants peace and security in the Middle East,’ Netanyahu said.

In a statement to Fox News Digital, White House spokesperson Anna Kelly declared, ‘President Trump and Prime Minister Netanyahu have a great relationship and Israel has had no better friend in its history than President Trump. We continue to work closely with our ally Israel to implement President Trump’s historic Gaza peace agreement and to strengthen regional security in the Middle East.’ 

Trump issued a Truth Social post last month warning that the U.S. will attack Iran if the Islamic Republic does not negotiate a nuclear deal.

‘Iran will quickly ‘Come to the Table’ and negotiate a fair and equitable deal – NO NUCLEAR WEAPONS – one that is good for all parties,’ Trump noted in the post. 

Trump, Netanyahu plan to meet over ongoing Iran nuclear talks

‘As I told Iran once before, MAKE A DEAL! They didn’t, and there was ’Operation Midnight Hammer,’ a major destruction of Iran. The next attack will be far worse! Don’t make that happen again,’ he warned.


This post appeared first on FOX NEWS

A Senate Republican who has routinely broken from the GOP and President Donald Trump announced that she wouldn’t support efforts to pass voter ID legislation. 

Sen. Lisa Murkowski, R-Alaska, said in a post on X on Tuesday that she would oppose forthcoming legislation that would enact more stringent election integrity laws backed by both Trump and conservatives in the upper chamber. Her opposition underscores a reality many in the Senate already acknowledge: without extraordinary steps such as nuking the filibuster or support from Democrats (a non-starter), the effort is effectively dead on arrival.

Murkowski panned a pair of bills — the Safeguarding American Voter Eligibility Act, dubbed the SAVE America Act, and the Make Elections Great Again (MEGA) Act — two voter ID and election integrity proposals making their way through the House. 

She noted that when congressional Democrats ‘attempted to advance sweeping election reform legislation in 2021, Republicans were unanimous in opposition because it would have federalized elections, something we have long opposed.’

‘Now, I’m seeing proposals such as the SAVE Act and MEGA that would effectively do just that. Once again, I do not support these efforts,’ Murkowski said.  

Congressional Democrats under former President Joe Biden tried and failed to enact two election reform bills, the John Lewis Voting Rights Act and the For the People Act. 

Congressional Republicans strongly opposed those efforts, and argued at the time that the bills would effectively nationalize elections and give Democrats control of the election system across the country.

Conservatives’ bid to reshape the election landscape also runs into the Constitution, which delegates election authorities to state and local officials and gives the federal government little input. 

‘Not only does the U.S. Constitution clearly provide states the authority to regulate the ‘times, places, and manner’ of holding federal elections, but one-size-fits-all mandates from Washington, D.C., seldom work in places like Alaska,’ Murkowski said.  

‘Election Day is fast approaching,’ she continued. ‘Imposing new federal requirements now, when states are deep into their preparations, would negatively impact election integrity by forcing election officials to scramble to adhere to new policies, likely without the necessary resources. Ensuring public trust in our elections is at the core of our democracy, but federal overreach is not how we achieve this.’

Her pushback comes as Trump has called on the GOP to nationalize elections. House Republicans are gearing up to vote on the SAVE America Act and a cohort of Senate Republicans are eying ways to get the bill onto the Senate floor.

Several Senate Republicans, including Senate Majority Leader John Thune, R-S.D., have come out against Trump’s call to nationalize elections. But public opposition to the voter ID efforts among Republicans is few and far between.

But given the political reality of the Senate, where the 60-vote filibuster threshold is an impossible bar to overcome without Senate Minority Leader Chuck Schumer, D-N.Y., and Senate Democrats’ support, the bill will likely die.


This post appeared first on FOX NEWS

As U.S.-Iran diplomacy remains primarily focused on Tehran’s nuclear program, Israeli officials and analysts warn that ballistic missiles remain a central red line for Jerusalem and could shape any decision on unilateral action.

Before departing for his trip to Washington, Prime Minister Benjamin Netanyahu said he plans to press Israel’s priorities in the talks. ‘I will present to the president our views regarding the principles of the negotiations — the important principles — and, in my view, they are important not only for Israel, but for anyone in the world who wants peace and security in the Middle East.’

Those priorities, Israeli officials say, extend beyond the nuclear file and include Iran’s missile capabilities. Israeli defense officials have recently warned U.S. counterparts that Iran’s ballistic missile program constitutes an existential threat to Israel and that Jerusalem is prepared to act alone if necessary, according to reporting by The Jerusalem Post.

The outlet reported that Israeli security officials conveyed in recent weeks their intent to dismantle Iran’s missile capabilities and production infrastructure through a series of high-level exchanges with Washington. Military planners outlined potential operational concepts aimed at degrading the program, including strikes on key manufacturing and development sites.

A spokesperson for Israel’s defense minister declined to comment on the issue.

Sima Shine, a former senior Israeli intelligence official and current senior researcher at the Institute for National Security Studies, told Fox News Digital that limiting talks to the nuclear issue risks missing what Israel considers the broader threat.

‘If negotiations deal only with the nuclear file and ignore the missiles, Israel will remain exposed,’ Shine said. ‘Iran treats its ballistic missile program as its main deterrence and will not give it up.’ She stressed that Tehran views them as a defensive and deterrent capability dictated by the supreme leader. Iranian Foreign Minister Abbas Araghchi said his country would not negotiate on its ballistic missile program, rejecting a core U.S. demand and further dimming prospects for a breakthrough deal. Shine described that stance as a fundamental red line for Israel. 

She also warned that Tehran may be stalling diplomatically while assessing whether Washington will limit the talks to nuclear constraints alone.

‘They have room to show flexibility on enrichment,’ she said, noting that activity slowed after strikes on facilities, ‘but missiles are different. That they would not discuss.’

Israeli concerns extend beyond the negotiating table. A former intelligence official familiar with strategic planning said Israel retains the capability to strike independently if necessary.

‘Israel can act by itself if there is no choice,’ the former official said, adding that missile expansion and regional threats would be key triggers.

Shine says the optics of Israeli pressure on Washington could complicate matters.

‘If missiles become the central public demand, it may look as if Israel is pushing the U.S. toward military action,’ she said. ‘If that fails, Israel could be blamed.’

She added that Iran’s missile arsenal is not aimed solely at Israel but forms part of a broader deterrence strategy against the United States and regional adversaries.

For Israel, the implication is clear. A nuclear agreement that leaves Iran’s missile infrastructure untouched could be seen in Jerusalem as stabilizing the regime while leaving the most immediate threat in place. That calculation, Israeli analysts say, defines the red line.


This post appeared first on FOX NEWS

The No. 2 House Republican in Congress tore into Mayor Zohran Mamdani on Tuesday after cold weather left 18 New York City residents dead.

House Majority Leader Steve Scalise, R-La., made the comments in the context of warning that Democrats’ rejection of a bipartisan compromise on funding the Department of Homeland Security (DHS) will leave critical offices — like the Federal Emergency Management Agency (FEMA) — with a dire lack of money.

‘What is not funded if the Democrats get their way? They will literally shut down funding for disaster relief and FEMA,’ Scalise said. ‘In the middle of a storm that in New York City alone — you want to see what socialism gets you — people now have frozen to death under the leadership of the socialist Mamdani. That’s what Democrat leadership gets you.’

Mamdani confirmed on Monday that an 18th person died in New York City during a period of dangerously low temperatures up and down the East Coast.

‘Since Friday’s press conference, one additional New Yorker lost their life on the streets of our city as a result of this cold snap. The total lives lost is now 18. Each life lost is a tragedy, and we will continue to hold their families in our thoughts,’ Mamdani said during a press conference about a separate issue.

He urged homeless residents to shield themselves from below-freezing temperatures at a shelter, while his administration has also deployed warming vehicles throughout the city.

Republicans, however, have accused Mamdani of not doing enough to expand access to emergency services during the bitter winter.

It’s not clear what role FEMA currently has in aiding New Yorkers during the city’s cold snap, but its potential cutoff in funding if DHS shuts down at the end of this week is one of Republicans’ main pressure points in forcing Democrats to agree to a deal.

Scalise also pointed out that the Transportation Security Administration (TSA) could also see its employees forced to work without pay if DHS funding lapsed.

‘They want to shut down TSA. So just take Atlanta’s airport, LaGuardia [in New York City]. Those two airports alone having been shut down, if the Democrats get their way, will wreak havoc with tens of millions of Americans who just want to go see their family members, want to travel for a wedding, or whatever the case may be,’ he said.

‘Maybe they’re trying to start a small business and want to go to another city to try to create some jobs. They won’t be able to do that because Democrats want to have a tantrum, not to defund ICE, because again, ICE is fully funded, but just because they want to cause chaos in America to get open borders.’

Immigrations and Customs Enforcement (ICE), whose funding Democrats have taken issue with specifically, got an injection of billions of dollars from President Donald Trump’s big, beautiful bill last year.

Fox News Digital reached out to the New York City mayor’s office for a response to Scalise’s comments.


This post appeared first on FOX NEWS

Flow Metals Corp. (CSE: FWM) (‘Flow Metals’ or the ‘Company’) is pleased to report that it has entered into an option agreement dated February 9, 2026 (the ‘Option Agreement’) with Go Metals Corp. (‘Go Metals’) to acquire the Monster IOCG project (the ‘Monster Project’), located approximately 90 kilometres north of Dawson City in the traditional territory of the Tr’ondek Hwech’in First Nation.

‘The acquisition of the Monster Project represents a Tier 1-scale opportunity and positions Flow Metals with meaningful exposure to both gold and copper. Our team has long believed in the Yukon’s exceptional mineral potential since we began working in the region in 2010, and the Monster Project marks a pivotal step in building a premier exploration portfolio,’ said Scott Sheldon, CEO of Flow Metals.

Monster Property, Yukon – IOCG Exploration Target

The Monster Property is a discovery-stage copper exploration project in Yukon, with percent-level copper and cobalt mineralization identified in surface showings. Exploration has identified geological features and metal associations consistent with iron oxide copper-gold (‘IOCG’) style systems.

Copper-cobalt showings have been identified over approximately 14 km of strike, defining a mineralized corridor. Grab samples have returned percent-level copper values, including results up to 22.3% Cu and 9.6% Co. To date, 45 grab samples across the project met the strongly mineralized threshold. These occurrences are spatially associated with both magnetic and gravity anomalies. Three main targets have been identified: Bloom, Arena, and Beast, ranging between 1,300 and 3,500 metres in width. Selected samples from these targets are summarized in the tables below. Grab samples are selective by nature and may not represent average grades of mineralized zones.

Parts of the property are underlain by rocks of the Wernecke Breccia, a regionally extensive Paleoproterozoic (~1.8 Ga) iron oxide-rich breccia system. The rocks are characterized by extensive fracturing, brecciation, and iron oxide alteration developed over kilometre-scale zones and are interpreted to record repeated fluid movement through the crust. The resulting fracture networks provide permeable pathways capable of focusing metal-bearing fluids.

A 2021 percussion drilling program was limited by a drill booster failure but intersected 0.72% Cu over 5.0 feet within hematite-chlorite altered breccia interpreted as IOCG-style mineralization. These results confirmed subsurface mineralization, even though the drill hole ended short of the inverted gravity anomaly. True widths and continuity are unknown, and further drilling is required to test the three main gravity anomalies.

Bloom Target (1.9 km²) selected grab sample highlights:

Sample ID Cu (%) Co (%) Au (g/t) Ag (g/t)
J20-22 3.19 0.39 0.11 11.31
J23-32 0.46 9.61 1.17 1.47
H10 1.21 2.41 0.57 4.29
19MOH-052 1.88 0.01 0.01 21.08
19MOH-022 1.70 0.20 0.14 2.80

 

 A total of 28 samples at Bloom met the Company’s strongly mineralized threshold.

Arena Target (5.1 km²) selected grab sample highlights:

Sample ID Cu (%) Co (%) Au (g/t) Ag (g/t)
19MOJA-09 7.31 0.01 0.03 8.54
19MO-047 6.10 0.56 0.52 15.20
J48 3.81 0.01 0.02 53.52
J35 0.19 2.96 0.49 0.29
19MO-063 0.22 1.11 0.30 0.29

 

A total of 21 samples at Arena met the Company’s strongly mineralized threshold.

Beast Target (2.4 km²) selected grab sample highlights:

Sample ID Cu (%) Co (%) Au (g/t) Ag (g/t)
19MO-015 2.72 0.00 0.16 2.31
19MOH-015 22.33 0.00 0.01 0.28
M18-38 0.80 0.00 0.00 0.07
M18-39 0.82 0.00 0.00 0.08

 

A total of 4 samples at Beast met the Company’s strongly mineralized threshold.

Option Agreement – Monster Project

Pursuant to the Option Agreement, Flow Metals may acquire a 100% interest in the Monster Project by completing the following payments and share issuances (collectively, the ‘Option Consideration’):

  • 3,000,000 common shares of Flow Metals, payable within 10 business days of receipt of all required approvals and CSE acceptance;

  • 3,000,000 common shares of Flow Metals on the one year anniversary of the execution date;

  • $2,000,000, payable on the 120th day of commercial production; and

  • Go Metals will retain a 2% net smelter return royalty (‘NSR’) on the Monster Project.

The transaction constitutes a ‘related party transaction’ for the purposes of Multilateral Instrument 61-101 – Protection of Minority Security Holders in Special Transactions (‘MI 61-101’), as certain directors and/or officers of the Company are also directors and/or officers of Go Metals. The Company will comply with applicable requirements of MI 61-101 in connection with the transaction.

The transaction is exempt from the valuation and minority approval requirements of MI 61-101 pursuant to sections 5.5(a) and 5.7(1)(a), as the fair market value of the transaction is not more than 25% of Flow Metals’ market capitalization. Further, Evans & Evans has been retained to provide a fairness opinion to the board of directors of Go Metals in connection with the transaction. The fairness opinion is expected to address the fairness, from a financial point of view, of the transaction to Go Metals and is not a formal valuation.

Sixtymile Project

The Sixtymile district is a historic placer gold camp that has produced gold since the 1890s and remains active today. Ongoing placer operations continue to recover angular and crystalline gold, which is interpreted to indicate a nearby bedrock source. Flow Metals’ mineral claims cover key placer-producing drainages, including Bedrock, Miller, Glacier, and Little Gold creeks. The claims lie within a thrust-related deformation corridor extending at least nine kilometres across the property, which is interpreted to have acted as a major structural conduit for mineralizing fluids.

Recent geological reinterpretation, based on detailed re-logging of historic drill hole DDH-11-18, has identified a folded metasedimentary (turbidite) sequence within the host schist. Gold-bearing quartz veins are interpreted to occur preferentially within competent, quartz-rich layers that have been folded into antiformal geometries within the structural corridor. Historical drilling intersected 105.30 m at 0.51 g/t Au from 88.0 m, including 24.07 m at 1.57 g/t Au in DDH-11-18*. This refined, fold-controlled model provides a focused framework for targeting higher-grade shoots within deformed, quartz-rich horizons.

*These results are historical in nature, have not been independently verified by the Company, and should not be relied upon as a current estimate of mineralization.

About Flow Metals

Flow Metals group has maintained an active presence in the Yukon since 2018, building deep technical expertise and local relationships across the territory. Flow Metals has established a trusted network of experienced contractors and strong working relationships with both territorial and First Nation governments, providing the Company with a solid foundation to efficiently advance exploration projects in the North.

Qualified Person

Harley Slade, P. Geo., is the Qualified Person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects and has reviewed and approved the technical information contained in this news release. Mr. Slade is Flow Metals Vice President of Exploration and a director of the Company.

For further information, please contact:

Scott Sheldon, President
604.725.1857
scott@flowmetals.com

Forward-Looking Information

This news release contains ‘forward-looking information’ within the meaning of applicable Canadian securities laws. Forward-looking information includes, but is not limited to, statements regarding: the completion of the transaction contemplated by the Option Agreement, including the timing of, and the Company’s ability to obtain, all required approvals; the Company’s ability to satisfy the conditions required to earn its interest in the Monster Project and the timing of any option payments, share issuances, milestone payments or other consideration; the exploration potential of the Monster Project and the Sixtymile Project; the Company’s planned exploration and development activities, including the scope, timing and results of future work programs and any future drilling; and other future plans, expectations, objectives or intentions of the Company.

Forward-looking information is based on assumptions that the Company believes are reasonable as of the date hereof, including assumptions regarding: the parties’ ability to satisfy the terms and conditions of the Option Agreement; the receipt of all required regulatory, third-party and exchange approvals, as applicable; the Company’s ability to obtain financing on acceptable terms, as required, to fund future exploration and development; the Company’s ability to access the properties and carry out planned work programs; the availability of contractors, equipment and other resources required to conduct exploration activities; and general business, economic and commodity price conditions.

Forward-looking information involves known and unknown risks, uncertainties and other factors that may cause actual results, performance or achievements to differ materially from those expressed or implied by such forward-looking information. These risks and uncertainties include, among others: the risk that required approvals may not be obtained on a timely basis or at all; the risk that the transaction contemplated by the Option Agreement may not be completed as contemplated or at all; the risk that the Company may not satisfy the conditions required to earn its interest in the Monster Project; risks inherent in exploration and development, including that exploration results may not be indicative of future results; operational and technical risks; changes in project parameters as plans continue to be refined; commodity price fluctuations; market volatility; and other risks described in the Company’s public disclosure documents available under the Company’s profile on SEDAR+.

Readers are cautioned not to place undue reliance on forward-looking information. All forward-looking information contained in this release is made as of the date of this release, and the Company disclaims any intent or obligation to update or revise any forward-looking information, whether as a result of new information, future events, or otherwise, except as required by applicable securities laws.

The Canadian Securities Exchange (operated by CNSX Markets Inc.) has neither approved nor disapproved of the contents of this news release.

Corporate Logo

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/283352

News Provided by TMX Newsfile via QuoteMedia

This post appeared first on investingnews.com

Nine Mile Metals LTD. (CSE: NINE,OTC:VMSXF) (OTC Pink: VMSXF) (FSE: KQ9) (the ‘Company’ or ‘Nine Mile’) is pleased to provide the details of drill hole WD-25-05 in addition to a summary of the 2025 drill program completed in December at the Wedge Project.

Drillhole WD-25-05:

DDH WD-25-05 collared on the same drill pad as WD-25-01 and drilled at an azimuth of 310 degrees and a dip of -60 to a final depth of 275 meters.

  • DDH-WD-25-05 was successful, intersecting massive VMS (Cu, Pb, Zn, Ag, Au) mineralization between 155.52 – 157.80 meters (Figure 1) followed by 40 meters of mineralized felsic volcanics (rhyolite) as seen in Figure 2 between 157.80 and 197.80 meters before terminating in sediments.
  • Mineralization consisted of both pyrite and chalcopyrite as disseminations, masses, and associated with quartz bands parallel to bedding.
  • All drill core has been measured, logged, photographed, marked, and cut for sampling at the company’s warehouse in Bathurst, New Brunswick. A quick XRF analysis was also completed for sulphide confirmation – filtering and width identification in definition for sampling core for Actlabs Analysis. A total of 55 sections were delivered to ALS Global in Moncton, New Brunswick for Base and Precious Metals analysis, including Antimony.

Cannot view this image? Visit: https://images.newsfilecorp.com/files/7335/283358_4923c8bf64124805_002.jpg

FIGURE 1: Brecciated contact between Graphitic Shear and VMS Mineralization.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7335/283358_4923c8bf64124805_002full.jpg

Cannot view this image? Visit: https://images.newsfilecorp.com/files/7335/283358_4923c8bf64124805_003.jpg

FIGURE 2: Banded pyrite and chalcopyrite within siliciifed felsic volcanics

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7335/283358_4923c8bf64124805_003full.jpg

Drill Holes BHEM -01 and BHEM-02:

Both drill holes were collared on permitted drill pads in the northwest along the western extension (Figure 4). The drill core for both BHEM-01 and BHEM-02 were solid with minimal faulting / fracturing in the host sediments providing ideal drill holes for surveying and subsequent follow up. Collared outside of known mineralization, the holes are well positioned to locate and model adjacent mineralization with no interference from a conductive source within the drill hole. Both holes are capped and easily accessible, the drill pads available for extending drilling further west and if required, additional depth.

Cannot view this image? Visit: https://images.newsfilecorp.com/files/7335/283358_4923c8bf64124805_004.jpg

FIGURE 3: Drilling BHEM – 01 in Northwest Area

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7335/283358_4923c8bf64124805_004full.jpg

Gary Lohman, VP Exploration, Director stated, ‘Our Wedge Drill Program has been very successful, intersecting Massive Cu bearing VMS where targeted in the western extension of the Wedge Deposit, as designed. Two holes were also drilled in the Northwest area to facilitate an upcoming BHEM survey, their locations in solid rock on the flanks of previous underground workings. In addition to identifying additional mineralization, the size and scale of the individual geological units and results from the upcoming BHEM program will assist in modeling the deposit and targeting additional drilling along the western extension. After our successful drilling in the southern lower extension of the deposit, our knowledge of the deposit and mineralization has increased and identified new areas of priority that were not permitted for this past drill program. We have identified new drill collar locations to continue to test the Copper Zone on the western extension in addition to potential locations that avoid the shear zone in the south. New permitting is underway in preparation of an exciting 2026 campaign at the Wedge, including our West Wedge and Tribag Target Trend drill programs.’

2025 Drill Program Overview:

The program consisted of 7 drill holes totaling 1,654 meters with 5 holes targeting copper mineralization in the western extension of the Wedge Mine with two additional holes collared in the northwest to facilitate BHEM (Bore Hole Electromagnetic) surveying this spring. The goal is to map the depth of the deposit and define the new copper zone. We should also be able to map the western parameters of the deposit, heading west towards the Tribag and West Wedge along trend.

The 2025 drill program was highly successful, with all five drill holes targeting copper mineralization intersecting both massive VMS (Cu, Pb, Zn, Ag, Au) and banded copper sulphide mineralization. The two holes collared to facilitate BHEM geophysical surveying were also successful, collared in the northwest portion of the western extension, away from the large, graphitic shear zone that bounds the deposit in the south and west of the interpreted extent of previous, underground workings. BHEM surveying has its best results when drilled away from the mineralization and the magnetic interference.

The five drill holes targeting mineralization were all collared in the southwest, crossing through a brecciated, graphitic shear zone (tectonic melange) before intersecting a well-defined massive VMS (Cu, Pb, Zn, Ag, Au) horizon. This is characteristic of the mineralized contact after which a sequence of intercalated sediments and volcanics are cut prior to the holes intersecting the main zone of VMS mineralization with mineralized widths between 13 and 48 meters.

The VMS mineralization consisted of abundant pyrite and lesser chalcopyrite, sphalerite, and galena. Local, secondary copper, covellite (CuS) and bornite (Cu5FeS4), was also identified in drill holes WD-25-02 and WD-25-04.

In the west, the metal zonation appears different than the drill holes completed in the east with the prevalence of a greater concentration of chalcopyrite and pyrite with lesser galena (Pb) and sphalerite (Zn). Although it is early in the process, we have confirmed the presence abundant chalcopyrite and coarser grained pyrite in the western extension.

The key observations in this program include:

  • Graphitic Shear Zone in contact with VMS confirmed as a diagnostic marker horizon in the southwest.
  • Mineralized siliceous volcanics were intersected in numerous drill holes, defining an additional, mineralized sequence.
  • VMS mineralization occurs in multiple horizons as seen in holes WD-25-01 and WD-25-02.
  • The intersected units (Argillite, VMS and Felsic Volcanics) are of substantial width and extent which will assist in the 3D modeling of the deposit and subsequent drill hole targeting.

Patrick J Cruickshank, MBA, CEO & Director, stated, ‘We are thrilled with the success of our Wedge Phase 2 Drill Program. To have all 5 holes strike mineralization was more than we expected. It is a testament to our Technical Team and specifically, Mike Dufresne and Gary Lohman. We already have identified Phase 3 Drill holes and are determined more than ever to expand this deposit’s footprint and expose this entire new 3rd High Grade Copper Lens. In addition, the BHEM surveys, the Phase 3 Wedge Drilling, the TriBag & West Wedge drilling to test this VMS Cluster Trend, 2026 will be filled with Wedge Project activity. We expect our first Assays to arrive this week from ALS Global and look forward to sharing the results.’

Cannot view this image? Visit: https://images.newsfilecorp.com/files/7335/283358_4923c8bf64124805_005.jpg

FIGURE 4: Drill Hole Locations, WD-25-05, BHEM-01, BHEM-02

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7335/283358_4923c8bf64124805_005full.jpg

All drill core has been measured, logged, photographed, marked, and cut for sampling at the company’s warehouse in Bathurst, New Brunswick. A quick XRF analysis was also completed for sulphide confirmation – filtering and width identification in definition for sampling core for ALS Global. A total of (57) samples in Hole WD-25-05 have been identified for Base and Precious Metals analysis, including Antimony, and have been shipped to ALSGlobal, Moncton, New Brunswick for Rush processing.

The disclosure of technical information in this news release has been prepared in accordance with Canadian regulatory requirements as set out in National Instrument 43-101 – Standards of Disclosure for Mineral Projects (‘NI 43-101’) and reviewed and approved by Gary Lohman, B.Sc., PGO., VP Exploration and Director who acts as the Company’s Qualified Person, and is not independent of the Company.

About Nine Mile Metals Ltd.:

Nine Mile Metals Ltd. is a Canadian public mineral exploration company focused on VMS (Cu, Pb, Zn, Ag and Au) exploration in the world-famous Bathurst Mining Camp, New Brunswick, Canada. The Company’s primary business objective is to explore its four VMS Projects: Wedge VMS Project, Nine Mile Brook VMS Project, California Lake VMS Project, and the Canoe Landing Lake (East – West) VMS Project. The Company is focused on Critical Minerals Exploration (CME), positioning for the boom in EV and green technologies requiring Copper, Silver, Lead and Zinc with a hedge with Gold.

Social Media

X: @NineMileMetals
LinkedIn: Nine Mile Metals
Facebook: @ Nine Mile Metals

ON BEHALF OF Nine Mile Metals LTD.

‘Patrick J Cruickshank, MBA’
CEO and Director
T: +1.506-800-0581
E: info@ninemilemetals.com

This press release may include forward-looking information within the meaning of Canadian securities legislation, concerning the business of Nine Mile. Forward-looking information is based on certain key expectations and assumptions made by the management of Nine Mile. In some cases, you can identify forward-looking statements by the use of words such as ‘will,’ ‘may,’ ‘would,’ ‘expect,’ ‘intend,’ ‘plan,’ ‘seek,’ ‘anticipate,’ ‘believe,’ ‘estimate,’ ‘predict,’ ‘potential,’ ‘continue,’ ‘likely,’ ‘could’ and variations of these terms and similar expressions, or the negative of these terms or similar expressions. Forward-looking statements in this press release include that (a) prior to commencing the 2023 exploration drill program, the ground will be mapped at surface and representative samples analyzed to determine the base and precious metal assay values, (b) the Ag and Au values will be reported upon receipt of the certified assay results from ALS Global, and (c) our current financial raise will enable us to drill the Wedge Project (along with our Canoe Landing VMS Project and follow up exploration work on our California Lake VMS Project) this season as opposed to next year. Although Nine Mile believes that the expectations and assumptions on which such forward-looking information is based are reasonable, undue reliance should not be placed on the forward-looking information because Nine Mile can give no assurance that they will prove to be correct.

The Canadian Securities Exchange (CSE) has not reviewed and does not accept responsibility for the adequacy or the accuracy of the contents of this release.

____________________________________________________________________________________

The Canadian Venture Building, 82 Richmond Street East, Toronto, ON M5C 1P1 (T) (506) 804-6117
www.ninemilemetals.com

Corporate Logo

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/283358

News Provided by TMX Newsfile via QuoteMedia

This post appeared first on investingnews.com

Tartisan Nickel Corp. (CSE: TN,OTC:TTSRF) (OTCQB: TTSRF) (FSE: 8TA) (‘Tartisan’, or the ‘Company’) is pleased to announce that the Company has acquired eleven additional claims in the Turtle Pond Area, approximately 40 kms south of Dryden, Ontario and approximately 70 kms east of the Company’s flagship Kenbridge Nickel-Copper-Cobalt Project.

The total property package now consists of 161 claims covering 3,375 ha. The claims are owned 100% by Tartisan Nickel Corps. wholly owned subsidiary Canadian Arrow Mines Limited. The property is situated in an area with excellent infrastructure.

Previous exploration efforts identified nickel-copper sulphide mineralization in twelve trenches along a 700-metre trend at the Glatz nickel copper showing. The zone, discovered in 1965 by local prospector A. Glatz, is up to 40 metres wide and is open along strike and at depth. Historical grab samples were reported to contain up to 1.95% Ni. In 2007, Canadian Arrow Mines Limited conducted a surface grab sampling program which produced the following results: 1.28% Ni, 0.26% Cu re Glatz Trench 3; 0.99% Ni, 0.18% Cu re Glatz Trench 3; 0.39% Ni, 4.06% Cu re Trench 4. The mineralization varies from disseminated sulphides to narrow semi-massive sulphide bands. Six short drill holes were completed at that time with hole GZ-09- 02 encountering 0.34% Ni, 0.16% Cu and 0.02% Co over 5.9 m from 45.0-50.9 m.

A nickel-copper-PGE discovery on the Double E airborne VTEM anomaly was identified in 2008. The drilling intersected two separate upper and lower mineralized zones in 2 drill holes. Hole EE-09-02 intersected 4.2 metres of 0.81% Ni, 0.52% Cu, 0.20gpt Pt, 0.16gpt P and 0.20gpt Au at a depth of 25.5 metres. This included 2 metres of 1.35% Ni, 0.81% Cu, 0.36gpt Pt, 0.27gpt Pd and 0.31gpt Au. A second zone was intersected at a depth of 135.1 metres containing 8.2m of 0.55% Ni and 0.38% Cu. Hole EE-l0-04 intersected 1.9 metres of 0.51% Ni, 0.24% Cu at a depth of 21.4 metres and a second narrow intersection of 1.9 metres of 0.52% Ni, 0.28% Cu at a depth of 28 metres.

Exploration diamond drilling work completed in 2009 and 2010 on the Night Danger nickel-copper reported a nine-metre-wide section of stringers and blebs of sulphide which assayed 0.57% Ni and 0.45% Cu at a drill depth of 79m in hole ND-09-1. Two sections within this interval assayed greater than 1% nickel. Drill hole ND-10-1 intersected 4.53% Ni over 0.7m at a drill depth of 57.5m (Source; MNDM assessment files and Canadian Arrow Mines Limited news release dated June 1, 2010, SEDAR).

From November 28th to December 21st, 2024, a TDEM Geophysical survey was performed on the Turtle Pond Property undertaken by Expert Geophysics Limited (SEDAR+ February 27, 2025). Tartisan Nickel Corp. conducted this survey for the purpose of determining drill targets and potential future exploration work on the Turtle Pond Project.

Mark Appleby, President and CEO of Tartisan stated ‘The Glatz, Double E and Night Danger nickel-copper showings display similar nickel and copper tenors as what we find near surface at our Kenbridge Nickel-Copper-Cobalt Project. Acquisition of these claims complement the company’s larger objective of developing the Kenbridge Nickel-Copper-Cobalt Project into an operating mine with a central milling facility. The Company will be formulating an exploration program consisting of surface sampling and potentially diamond drilling for 2026-27.

Cannot view this image? Visit: https://images.newsfilecorp.com/files/1492/283392_1697a81eb4639a70_002.jpg

Figure 1: Location and Regional Geology of the Turtle Pond Project and Kenbridge Ni-Cu-Co Project

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1492/283392_1697a81eb4639a70_002full.jpg

Cannot view this image? Visit: https://images.newsfilecorp.com/files/1492/283392_1697a81eb4639a70_003.jpg

Figure 2. Turtle Pond: Night Danger, Glatz, Double E property outline and Historical Mineral Showings

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1492/283392_1697a81eb4639a70_003full.jpg

Qualified Person

The technical information in this news release has been prepared in accordance with Canadian regulatory requirements as set out in NI 43-101 and reviewed and approved by Dean MacEachern, P. Geo., an Independent Consultant to the Company and a Qualified Person as defined by NI 43-101.

About Tartisan Nickel Corp.

Tartisan Nickel Corp. is a Canadian-based critical minerals exploration and development company which owns, the Kenbridge Nickel Project near Sioux Narrows, Northwestern Ontario, the Sill Lake Silver Project near Sault Ste. Marie, Ontario as well as the Night Danger, Glatz Turtle Pond Project near Dryden, Ontario.

Tartisan Nickel Corp. common shares are listed on the Canadian Securities Exchange (CSE: TN,OTC:TTSRF) (OTCQB: TTSRF) (FSE: 8TA). Currently, there are 152,215,641 shares issued and outstanding (156,287,356 fully diluted).

For further information, please contact Mark Appleby, President & CEO, and a Director of the Company, at 416-804-0280 (info@tartisannickel.com). Additional information about Tartisan Nickel Corp. can be found at the Company’s website at www.tartisannickel.com or on SEDAR at www.sedarplus.ca.

This news release may contain forward-looking statements including but not limited to comments regarding the timing and content of upcoming work programs, geological interpretations, receipt of property titles, potential mineral recovery processes, etc. Forward-looking statements address future events and conditions and therefore involve inherent risks and uncertainties. Actual results may differ materially from those currently anticipated in such statements.

The Canadian Securities Exchange (operated by CNSX Markets Inc.) has neither approved nor disapproved of the contents of this press release.

Corporate Logo

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/283392

News Provided by TMX Newsfile via QuoteMedia

This post appeared first on investingnews.com